Springfield, OR Shop, Serving Eugene and Lane County

RV Wrap Installation for Eugene and Springfield, Oregon

Blue Rose Auto wraps motorhomes, fifth wheels, travel trailers and campervans in 3M and Avery Dennison vinyl at our shop at 3436 Olympic St in Springfield. Our ASE-certified technicians correct the surface under the film in the same bays, so the wrap goes onto fiberglass that is ready for it.

Our RV and Boat Services

01

RV and Boat Services

Repair, paint, detailing, protection and wraps for motorhomes, fifth wheels, campervans and boats at 3436 Olympic St.

02

RV Repair in Eugene, OR

Mechanical, roof and gelcoat repair for Eugene owners who bring their rigs to our Springfield shop.

03

RV Repair in Springfield, OR

The same mechanical, roof and gelcoat repair for Springfield rigs parked close to the shop.

04

RV Paint Correction and Ceramic Coating

Oxidation removal, multi-stage paint correction and Ceramic Pro coating for gelcoat and painted fiberglass.

05

Car Wraps in Eugene, OR

Color change, partial and chrome-delete wraps for cars, trucks and SUVs, installed in the same shop.

Two Blue Rose Auto technicians on ladders cleaning and polishing a travel trailer

An RV Wrap Quote Starts With Length, Coverage and Surface Condition

Blue Rose Auto wraps RVs at 3436 Olympic St in Springfield, Oregon, for owners across Eugene and Lane County. We quote by rig length, coverage (caps, half or full) and the condition of the surface under the film, and we do not hand out a flat price chart. The RV Geeks and Engineer Fix put full RV wraps anywhere from $2,500 to $15,000, and most of that spread comes from length and prep. Oxidized or chalky gelcoat gets corrected before film goes on, because Avery Dennison gives no removability warranty on chalked surfaces. Call (541) 641-8877 with your rig's length and photos of every side.

RV Wraps We Install for Motorhomes, Fifth Wheels and Campervans

Each RV class has its own panel quirks, so tell us the make, model and year when you ask for a quote.

01

Class A Motorhomes and Front Caps

A Class A has long flat sidewalls and a rounded fiberglass front cap that takes the rock chips. We wrap sidewalls, caps or the whole coach, and pair a cap wrap with paint protection film when you want the nose protected as well as recolored.

02

Class B and Class C Motorhomes

Cab-over bunks and mixed-material cabs mean more seams than a Class A, so we plan film breaks around the cab-to-body joint.

03

Fifth Wheels and Travel Trailers

A towable has large flat panels and a lot of hardware. Marker lights, vents, latches and awning brackets come off or get relief cuts, and a fifth wheel's raised front cap gets its own film plan.

04

Campervan Conversions

We wrap campervan conversions on Sprinter, Transit and ProMaster bodies for a new color or a custom livery. A van that works as a fleet vehicle belongs with our commercial wrap work.

05

Accent Wraps and Graphics Replacement

Faded decals, slide-out faces, window surrounds and stripes can be replaced without wrapping the whole rig.

Two Blue Rose Auto technicians correcting the paint on a motorhome sidewall from scaffolding

What Decides Our Quote for an RV Wrap?

Our quote rests on the rig itself, in this order. First is the measured length and height of the rig. Second is coverage, meaning caps, a half wrap or the whole body. Third is what the surface needs before film can go on. The table shows what published guides say, and the RV wrap cost research with sources names every source.

Scope Typical rigs Published market range (source)
Window or slide-out accent Any RV $200 to $250 each (The RV Geeks)
Front and rear caps Class A About $1,500 (The RV Geeks)
Half wrap Class B or C, 24 ft About $1,500 (The RV Geeks)
Half wrap, both sides Trailer or fifth wheel, 25 to 30 ft $2,000 to $3,000, ends about $500 each (The RV Geeks)
Full wrap, under 20 ft Pop-up, small trailer, campervan $2,500 to $6,000 (Engineer Fix)
Full wrap, 25 to 35 ft Class C, trailer, large fifth wheel $6,000 to $12,000 (Engineer Fix); about $5,000 for a 28 ft trailer (The Vinyl Creator, a film supplier)
Full wrap, 36 to 40 ft Class A $6,500 to $7,000 for 40 ft (The Vinyl Creator) against $10,000 to $25,000 or more (Engineer Fix)
Full wrap, 41 ft and longer Diesel pusher, bus conversion $12,000 to $15,000 or more for 43 ft (The RV Geeks)

Prices checked November 2026. These are published estimates from the sources named, not Blue Rose Auto prices. On a 36 to 40 ft Class A the sources disagree by more than 2 to 1, so the scope behind a number matters.

Treat the table as a map of what wraps run across the country. Where your rig lands depends on its length, how much of the body gets film and what the surface needs first, and none of that can be judged from a spec sheet. Send photos of every side or roll the rig into the Springfield bay, and the figure you get from us is the figure on the work order before any film is cut.

Add-Ons That Change the Quote

Add-on When it applies
Surface prep and gelcoat repair Chalky, oxidized or damaged fiberglass
Old graphics removal Decals or old film already on the rig
Paint correction before film Swirled, hazed or failing paint
PPF front cap You want the nose protected
Design and artwork Custom livery or printed graphics
Textured, metallic or color-shift film Specialty finishes carry a film premium
Technician polishing the sidewall of a Class A motorhome at Blue Rose Auto

Can Your RV Be Wrapped? Surface Prep Decides

Most RVs can be wrapped, but not every RV today. Film sticks to what is under it, and chalky gelcoat or failing clear coat is the usual reason a wrap lifts early.

  • The hand-wipe chalk test. Residue on a clean palm wiped across the sidewall means oxidized gelcoat that film will not hold.
  • Old decals. Thick graphics leave edges that show through new film, so we remove them first.
  • Failing clear coat on caps. Peeling clear lifts under film, so we stabilize or refinish that area first.

Avery Dennison's SW900 data sheet (Rev 20, March 2026) lists the surfaces it will not warrant for removal, including oxidized or chalked substrates and paint older than five years. When the gelcoat is chalky, the fix is paint correction and ceramic coating first, then film. We decline to wrap over chalked gelcoat until it is corrected. On gelcoat that has failed outright, paint can be the better call, and the vinyl wrap versus paint comparison weighs finish and resale in detail.

Our RV Wrap Process, Step by Step

The same eight steps apply to a 17 ft trailer and a 40 ft coach, and we confirm the day count when we measure.

  1. We measure the rig, photograph every side and the roof, and confirm bay fit before we book it.
  2. We wash and decontaminate the body to pull off road film, sap and wax.
  3. We run the chalk test and inspect each panel for clear coat failure, damage and old adhesive.
  4. We remove old graphics and test the surface underneath.
  5. We pull or mask hardware such as marker lights, vents, latches and brackets where it comes off cleanly.
  6. We correct or repair the surface so the film has a sound base.
  7. We lay 3M or Avery Dennison film panel by panel, with relief at rivets and seams.
  8. We post-heat the edges, inspect the finished work with you and walk you through care.
Fifth wheel trailer being washed in the Blue Rose Auto lot

When a Wrap Makes Sense and When Paint Does

Factor Wrap Paint
Surface in good shape Fits well and can be removed later Works, but permanent
Surface chalked or failing Needs correction first Refinishing can address the base
Roof Shortest-lived area under film A separate repair decision
Partial changes Caps, half wraps and graphics are easy A partial repaint risks color mismatch
Blue Rose Auto technician polishing the front of a Class A motorhome from scaffolding in the bay

Film, Finishes and Warranty

We install two film lines, 3M Wrap Film Series 2080 and Avery Dennison SW900. Both are cast vinyl, which conforms to rivets, curves and corrugated panels better than calendered film. Gloss, satin, matte, textured, metallic and color-shift finishes are available.

Rating Avery Dennison SW900 (color) 3M Wrap Film Series 2080
Vertical surfaces 10 years in Avery's Zone 1 rating Up to 8 years
Horizontal surfaces 2 years in Avery's Zone 1 rating Up to 3 years

Avery rates durability by climate zone, and 3M reduces its terms in desert Southwest zones, so these are the manufacturers' published ratings and not a promise for any one rig. Sources are Avery's SW900 data sheet (Rev 20) and 3M's U.S. wrap film FAQ. A roof is a horizontal surface, so it ages first, and we do not recommend wrapping an RV roof.

Install temperature is the second limit. Avery lists a minimum application temperature of 50 F for flat and simple curves and 60 F for complex curves. The January average high in Eugene, OR is 48.1 F (NOAA normals), so winter work depends on bay temperature.

Blue Rose Auto's standard warranty of 3 years or 36,000 miles covers vinyl wraps. We put in writing how the term reads for your rig, since mileage means little on a trailer.

What Oregon Rain, Sap and Sun Do to a Wrapped RV

Eugene, OR gets 40.83 inches of rain a year (NOAA, 1991 to 2020), and about 78% of it falls from October through March. December alone averages 7.21 inches, while July brings an average high of 84.0 F and 0.32 inches, so one roof sees months of standing water and then months of sun.

  • Roof first, sidewalls last. It takes flat-angle sun and holds water.
  • Covered storage helps. It keeps sap, moss and UV off the film.
  • Wash by hand and keep pressure low. 3M advises a pressure washer under 2,000 psi, below 180 F and at least a foot from the film. Cleaning a wrap through a wet Oregon winter has its own routine.
  • No wax, solvents or coatings without asking us. Avery's data sheet voids its SW900 warranty when petroleum-distillate or solvent soaps, waxes or protective coatings are used.
Blue Rose Auto technician hand finishing a motorhome sidewall in the bay
Class A motorhome with a corrected gloss finish inside the Blue Rose Auto bay in Springfield, OR

Add-Ons That Protect a New Wrap or Fix the Surface Under It

  • Paint protection film on the front cap. We install STEK, HITEK, XPEL and SunTek film over the nose, where a Class A takes its chips.
  • Paint correction. Blue Rose Auto is a Ceramic Pro Certified Elite Dealer, and we correct oxidized or hazed fiberglass before film goes on.
  • Ceramic coating. On painted or bare gelcoat, yes. Over a wrap, ask us first, because Avery lists protective coatings among the products that void its warranty.

Why RV Owners Bring Their Rig to Blue Rose Auto

  • We wrap, correct and protect the surface in the same bays, so your rig does not shuttle between shops.
  • Blue Rose Auto is a Ceramic Pro Certified Elite Dealer, and our technicians are ASE certified.
  • Blue Rose Auto opened in 1994.
  • An RV body shop is built around paint and gelcoat, and a mobile detailer works outdoors. We wrap, correct and protect at one address.

Shawn Knuckey wrote that the owner "actually listens to you instead of talking over you." Katie Brown, who brought us a car and an RV, wrote that we are "becoming a company my whole family is using!"

Class A motorhome with a painted mural on the rear inside the Blue Rose Auto shop

Eugene, OR and Lane County Owners Drive to Our Olympic Street Shop

Blue Rose Auto has one location, 3436 Olympic St in Springfield, and RV owners from across the valley bring their rigs there. Downtown Eugene is about 15 minutes away via I-105. Santa Clara and River Road are about 20 minutes, and Coburg is about 20 minutes north via I-5 exit 199. Creswell is about 25 minutes, Lowell about 30, and Junction City and Cottage Grove about 35. Veneta and Harrisburg (in Linn County) run about 40 minutes. We wrap at our shop, so you bring the rig to us.

Two Blue Rose Auto technicians on ladders cleaning and polishing a travel trailer
Two Blue Rose Auto technicians correcting the paint on a motorhome sidewall from scaffolding

RV Wrap Work We Can Show Today

We have not published a finished RV wrap gallery yet, so we show the closest work we have and label each piece for what it is. Completed RV wraps will be added here as they come out of the shop.

A cargo trailer wrap. A builder brought us an enclosed cargo trailer for a full commercial wrap, and we installed it in our shop. It is a trailer and not an RV, but it shows how we handle film on a tall, flat-sided towable with rivets and seams.

Surface correction on RV-class fiberglass. Gary Carl has brought his boat, RV, cars and truck to us over the years for ceramic coating and detailing, and wrote, "Their work is flawless." A small fiberglass egg trailer got a hand wash and wax for Kar Wask. That is the prep skill a wrap depends on.

Vinyl graphics on the radar. Rich Hickam brought us RV roof sealant checks, detailing and a rusted dump trailer repaint, then wrote, "Now I've discovered they do vinyl graphics and can't wait to see what they come up with for my boat."

Send Us Your RV's Length and Photos for a Written Quote

Send or bring us the following.

  1. Length, and height if you know it.
  2. Make, model and year.
  3. Photos of both sides, the front, the rear and the roof.
  4. Slide-outs, awnings and any ladders or racks you want kept.
  5. Your current graphics or decals, and any fading or peeling.
  6. The coverage you are picturing (caps, half wrap or full) and the finish.

Call Blue Rose Auto at (541) 641-8877, or use the quote button above.

Page last updated November 2026

Find Blue Rose Auto in Springfield, OR

RV Wrap Questions From Lane County, Oregon Owners

What will my RV wrap quote depend on?

Your quote depends on rig length, coverage and the condition of the surface under the film. The RV Geeks and Engineer Fix range from about $200 per accent panel to $15,000 or more for a 43 ft coach, and we measure and inspect before naming a figure. The RV wrap cost research lists the sources.

Do you wrap fifth wheels, Class C motorhomes and campervans?

Yes. Blue Rose Auto wraps Class A, B and C motorhomes, fifth wheels, travel trailers and campervan conversions in 3M and Avery Dennison film. Fleet vans go to our commercial wrap work.

Can you wrap over old decals or oxidized gelcoat?

Old decals come off first, and oxidized gelcoat gets corrected before film goes on. Avery Dennison gives no removability warranty on chalked or oxidized surfaces,. We run the chalk test at inspection.

Can you wrap the roof or slide-outs?

We wrap slide-out faces and keep film clear of the seals. We do not recommend wrapping an RV roof, because the film makers rate horizontal surfaces for far fewer years. Avery's SW900 color film is rated 2 years horizontal against 10 vertical in its Zone 1 rating.

Is wrapping cheaper than painting an RV?

It depends on the rig and the surface. A wrap or partial wrap often costs less than a full repaint when the gelcoat is sound, and paint can make more sense when the gelcoat has failed. The vinyl wrap versus paint comparison sets the two side by side.

Can I wax or ceramic coat a wrapped RV?

Ask us before you do. Avery Dennison's SW900 data sheet voids its warranty when petroleum-distillate or solvent soaps, waxes or protective coatings are used. We tell you what a coating does to your film coverage before we apply one.

What warranty covers an RV wrap?

Blue Rose Auto's standard warranty of 3 years or 36,000 miles covers vinyl wraps. We put in writing how the term reads for your rig. Film makers carry separate warranties with exclusions, such as chalked substrates.

How long will my RV be in the shop, and how big a rig can you take?

The day count depends on the rig and the prep, and we confirm it when we measure. Send us your rig's length and height and we confirm bay fit before we book it.

Can a wrap come off without damaging the paint?

On sound factory paint, a wrap usually peels off later without harm. Avery excludes removability coverage on oxidized or chalked surfaces, improperly cured paint and paint older than five years. We inspect the surface at the quote and tell you which category your rig falls into.